The written safety programs a steel erection contractor is expected to keep on file, built to your operations and delivered as editable Word files you own. One-time $199. No subscription.
Steel Erection
Company Safety Manual
Steel erection carries the hazards OSHA addresses in its own dedicated standard — 29 CFR 1926 Subpart R — including hoisting and rigging, structural steel assembly, column anchorage, the connecting work where most erection collapses occur, and the fall protection required above 15 feet. The written program behind that work is exactly what a general contractor or prequalification platform expects documented before your crew sets steel.
The Steel Erection Quick Pack assembles the 15 written programs this trade points to — including a dedicated Steel Erection Program (Subpart R), Fall Protection, Crane/Hoist/Rigging, Welding & Hot Work, Compressed Gas Safety, Hand & Power Tool, Ladder Safety, Aerial Lift, Hearing Conservation, Thermal Stresses (outdoor heat and cold), Electrical Safety, Hazard Communication, PPE, First Aid, and Ergonomics — each written to your company's operations rather than pulled off a generic shelf.
Every program is an editable Word (.docx) file you own, and the download leads with a Company Safety Manual Cover Sheet and Master Table of Contents so the set assembles into one organized manual ready to print, tab, and submit — not a folder of disconnected files.
This is your company-level written program set — how your company works safely across all steel erection jobs. A site-specific erection plan documents one project's sequence, cranes, and connections and is prepared by a qualified person or the project structural engineer. GCs typically ask for the company manual first; the included Steel Erection Program is written so you can attach your site-specific plan per job.
Yes. The dedicated Steel Erection Program is built on Subpart R — the two-bolt wrench-tight rule before load release, the four-anchor-rod column requirement, connector and controlled decking zone rules, and the 15-foot fall protection trigger — with labeled fields and a daily checklist to complete for your operations, and connection and anchorage design routed to a qualified person or the project structural engineer.
Yes — editable Word (.docx) files you download, complete in the highlighted fields, and own outright. Nothing locked, no subscription.
It gives you the written programs those platforms ask contractors to have on file, organized and ready to submit. The platform or reviewer makes the acceptance decision; TemplaKit gives you the documentation to submit.
100% of your $199 credits toward the $450 Core OSHA Build if you upgrade later — you're only ever charged the difference.
Not sure which of these matches your operations? Look up your trade or NAICS code — free, no account needed.